KAROFIX® SUPER FLEX

 

KAROFIX®SUPER FLEX

 

Ready Mix Elastic Tile Adhesive With High Performance

 

APPLICATION FIELD

Used for laying ceramic, granite porcelain ceramic, marble applications; ceramic applications on ceramic, granite, travertine, decorative brick, floors that deformation and temperature differences easily occur, on vertical and horizontal surfaces,for damp bulky floors, places that has a risk for thermal shock and floors that vibration can occur.

It can be used for interior and exterior faces of the buildings.

Before the applications,it must be PRİMEL 600  for adherence increase to used on gypsum plaster and gypsum board.

 

 

CHARACTERISTICS

 

For big size ceramic, granite, porcelain, marble and travertine,applications,

It can use 15mm

Suitable for ceramic applications on ceramic,

High Elastic characteristic and High Adhesive Performance

Resistance to thermal shock,water and freeze

It can use  under Heavy Traffic on ground

With polymer additives

Suitable for using cold storage

 

 

APPLICATION
SURFACE PREPARING  

 

The surface must be purified from form oil, dust, paint and adherence reducing materials.

All the holes must be filled and repairs must be made with appropriate Entegre product before plastering.

Application surface must be dampened with water.

Before the applications,it must be PRİMEL 600  for adherence increase to used on gypsum plaster and gypsum board.After the drying (apx.24 hours) it can start to application.

 

 

 

 

 

MORTAR PREPARING AND APPLICATION

 

KAROFIX® SUPER FLEX is mixed  with an electrical dril (6-6,75 lt. water/25 kg bag) until the homogene mortar.

Should be waited for 5 minutes and mixed again to obtain a fully homogeneous product.

Prepared mortar is applied on surface  with a suitable notch then the tiles are laid. Application thickness is between 3-15 mm.

Plastic hammer must be used to the surface for a good performance.

If the tile is larger than 40 x 40 cm, the application must be done for both sides.

 

 

CONSUMPTION

 

This values for one side applications.

 

Notch Size (mm)

Consumption (kg/m2)

3

2

4

2-3

6

4

8

5-6

10

6-7

 
 

TECHNICAL DATA

 

Open Time (EN 1346): After 20 minutes  (EN 1346)

≥ 0,5

Application Time, hours

<2

Tensile Adhesion Strength / Initial, mm2 (EN 1348)

≥ 1

Tensile Adhesion Strength / After immersion in water, mm2 (EN 1348)

≥ 1

Tensile Adhesion Strength / After heat exposure, mm2 (EN 1348)

≥ 1

Tensile Adhesion Strength / After freeze/thaw cycles, mm2 (EN 1348)

≥ 1

Slip mm (EN 1308)

≤0,5

 

 

 

PACKAGING AND STORING

 

·         25 kg kraft paper or polypropylene bags, in the sling or shrink covered pallets upon request.

·         1 year from the date of manufacture if stored in unopened original package; under dry, frost free conditions and arranged maximum 8 bags one above the other.

·         Suggested to be consumed in 1 week after the package is opened.

WARNINGS

 

·         No other materials (lime, cement, gypsum etc..) should be added to the prepared mortar.

·         Don’t use mortar is out of date.

·         Joints can be filled 24 hours later.

·         Use for coating with water absorption ≤0,5 and >0,5 (ceramic,granite and porcelain ceramic,travertine etc.).

·         The following coating areas are suitable for an optimum applications:

Indoor and outdoor grounds: Area <3600 cm2

Outdoor walls: Area <1200 cm2 (12m height)

Outdoor walls: Area <2000 cm2 (8m height)

Outdoor walls: Area <3600 cm2 (4m height)

·         Recommended to KAROFIX® SUPER FLEX Beyaz for light color applications.

·         Suggested that the application is done between +5°C, +35°C.

·         For the ideal application, the coating material must be join on mortar in 25 minutes.

·         On areas that higher than 8m,it must be taken to mechanical prevent actions.

·         Do not apply on frozen surfaces.

·         It should not be applied under sun.

·         Don’t go beyond the application field and rules.

·         As it is cement based product, do not smell it directly.  Wash your eyes in case of contact. Call your doctor if it is necessary.

·         For detailed information please request security data sheet.

·         Contact  us for the other application fields and for your technical questions.

 

CERTIFICATE OF CONFORMITY

 

       
   
     
 

 

 


          It has been producing in accordance with TS EN 12004 / C2T Standard.

 

    C2 Improved adhesive

                    T: adhesive with reduced slip

 

Above mentioned data has been obtained in laboratory environment. Please get in touch with our Technical Departmant  for more detail.

Entegre reserves right to amend tha abovementioned information and data.

Entegre will not be held responsible from the failures due to improper use and applications. 

 

© ENTEGRE Tüm Hakları Saklıdır.