FUGAFIX SLK SUPER FLEX ®

 

FUGAFIX SLK SUPER FLEX®

Silicone enhanced, resistant to fungal and mould growth , high performance cement based ready mix elastic joint filler. (for 0 to 20 mm joints.)

 

APPLICATION FIELD

It can used  all of the wet areas and proper for filling tile joints of ceramic tile, granite and natural stones in walls and floors for both interior and exterior application for 0-20 mm joints.

Suitable for use as joint filler for swimming pools ,terrace and roof covering materials.

Used for heating floors,all commercial and heavy traffic uses,cold storage, ground that vibration can occur.

 

CHARACTERISTICS

Elasticity and high performance

Easy clean

Pool applications

Fungal and mould resistant

Smooth and brilliant surface

High abrasion resistance

Water-repellent in high rate

Resistance against water and freeze

 

APPLICATION

 

SURFACE PREPARING

Before application, dust, chops, debris, cement residues between the joint spaces should be scraped off and cleaned by brush.

If it is necessary joint spaces should be damped before application.

 

MORTAR PREPARING AND APPLICATION

§ First water is poured into the mixing bowl, then FUGAFIX SLK SUPER FLEX® is added. (6,5-7,5 lt water / 20 kg bag) and mixed untill the lumps are dissolved. It is suggested to use low-speed mixer for mixing. It is waited for 5 minutes, in order to gain a homogenous mixture it is mixed again.

 

§ Prepared mortar is applied by using rubber spatula in suitable thickness or plastic trowel.

 

§ Surface is cleaned with a dampened sponge approximately 30 minutes after application. Using high porous ceramic tiles and under high temperatures and  wind the time gets shorter.

 

§ If cleaning is early time or/and if use wet sponge ,may be damaged joint filler.Sponge can be frequently clean

 

§ After the enough drying for FUGAFIX SLK SUPER FLEX® , any residue can be cleaned from the surface with a clean dry cloth.

 

§ For high performance,joint filler’s surfaces humidified 1 day  after the application

 

§ If the surface of joint filler is not enough clean,it can be use approvable cement remover for clean, at least 10 days after grouting the joints.

 

CONSUMPTION

 

* Consumption Quantity (gr/m2)

Ceramic Size (cm)

                                       Joint Width (mm)

3 mm

4 mm

5 mm

6 mm

10 mm

15 mm

20 mm

10*20

500

670

830

1000

1660

2490

3320

15*15

440

590

740

880

1480

2220

2960

15*20

390

520

650

780

1300

1950

2600

20*20

330

440

550

660

1100

1650

2200

20*25

300

400

500

600

1000

1500

2000

20*30

280

370

470

560

940

1410

1880

33*33

200

270

340

400

680

1020

1360

 

 

* By the referance of  10 mm and low water absorbsion grouting material.

 

 

TECHNICAL DATA

 

Using time, hours

<2

Water absorption, after 30 minutes, gr (EN 12808-5)

≤2

Water absorption, after 30 minutes, gr (EN 12808-5)

≤5

Shrinkage, mm/m (EN 12808-4)

≤3

Flexural Strength (after 28 days), N/mm2 (EN 12808-3)

≥2,5

Flexural Strength (after freze/thaw cycles), N/mm2 (EN 12808-3)

≥2,5

Compressive Strength (after 28 days), N/mm2 (EN 12808-3)

≥15

Compressive Strength (after freze/thaw cycles), N/mm2 (EN 12808-3)

≥15

Abrasion Resistance, mm3 (EN 12808-2)

≤1000

 

 

 

PACKAGING AND STORING

 

If it is demanded, shipped by pallettes or sling bag, through 10 and 20 kg polyethylene supported multi-ply paper bags and 5 kg polyethylene bags

Provided that superimpose 8 layers maximum, can be stored 1 year as of production date at the damp-free and frost-free environment. It is suggested to be use within 1 week, when the package is opened.

When not in use, packaging  should be closed tightly.

 

WARNINGS

 

§ Any additonal or supplementary material (lime,  cement, plaster etc.) should not be added into the prepared mortar.

§ If applicability time is finished,the fiiler joint can’t use again

§ It should be waited for at least 24 hours for grout application after cementation.

§ It is advised that the application should be performed when the temperature is between +5°C, +35°C

§ It should not be applied at the frosty surfaces.

§ Approvable cement remover can be use for cleaning of the dirtied joints and grouts.

§ Please keep within the guidelines of specified application surface and using instructions.

§ Do not breathe direcly. In case of contact with the eyes, wash with plenty of water and if necessary get in touch with the physician.

§ After the applications,hands and all tools should be clean

§ For more information, please demand product safety brochure.

§ Please ask for advise for all other application provisions and technical questions.

 

 

 

CERTIFICATE OF CONFORMITY

 

 

TS EN 13888/Mart 2010 CG2WA

 

CG2WA: Cementitious grout with improved performance, high abrasion resistance and reduced water absorption. 

 

 

       
   
     
 

 

 

 

  

Above mentioned data has been obtained in laboratory environment. Please get in touch with our Technical Departmant  for more detail.

Entegre reserves right to amend tha abovementioned information and data.

Entegre will not be held responsible from the failures due to improper use and applications.

© ENTEGRE Tüm Hakları Saklıdır.