GRAIN FINISH SILICONE EXTERIOR COATING
TECHNICAL DATA SHEET
 
 
WITH SILICON INTEGRATED GRAIN FINISH EXTERIOR COATING
Based Acrylic Emulsion , Camouflage , Silicone Additive , Water -Based, Matt And Textured Exterior Wall Coating
 
APPLICATION
Conventional plaster, concrete, gas concrete, concrete , particle board, fiber cement , brick, putty and painted exterior surfaces, decorative and protective surface coating used.
 
PROPERTIES
Acrylic binder and containing silicone additives
Highly breathable ( water vapor permeability ) have
Low water absorption
Atmospheric conditions , solar radiation, friction and wear-resistant, protects the surfaces
Applications with ease
With high closing force
With good adhesion to the surface applied to
It has a high lifetime .
 
APPLICATIONS
SURFACE PREPARATION
Application surface , mold oil, dust, paint and adherence reducing material must be purified .
Repair cracks and holes prior to application of the same material or a suitable repair mortar should be done with Integrated .
The newly builtconventional plastered surfaces . 21 days ( 20 ° C) for drying plaster should be expected.
 
PRODUCT PREPARATION AND APPLICATION
Newly plastered surfaces before painting INTEGRATED SILICON -BASED EXTERIOR ACRYLIC PRIMER must be applied .
Prepared surfaces INTEGRATED GRAIN FINISH EXTERIOR COATING for first coat , 40% by volume with lambskin roller application should be made by diluting with water .
Waiting time between coats after the desired coating thickness and surface texture compared to the second floor for the application INTEGRATED GRAIN FINISH EXTERIOR COATING 10-15 % by volume thinned with water or coral lambskin roller application is made .
Depending on ambient temperature and humidity between the layers at least 6 hours.
 
CONSUMPTION
In a single layer with 1 kg of 0.8-1 m²
 
TECHNICAL SPECIFICATIONS

view

Matte, colored and textured

The chemical structure

Acrylic emulsion doped silicon

Density

1,95 ±0,02 g/m³

Drying time ( 20°C de %50 RH )

Min. 24 saat

Recoat time

Min. 6 saat (20°C, % 50 RH)

Thinner

Water

Thinning rate

40% for the first coat 10-15% thinning

Recommended practice times

2nd floor

 

 
PACKAGING AND STORAGE
 
· 15 liters' health are shipped in plastic packaging.
 
· Dry and frost-free environment must be stored in unopened original packaging.
 
 
 
WARNINGS
 
· Before use in paint cans should be mixed until homogenous.
 
· Do not apply in direct sunlight and windy.
 
· Application of +5 ° C to +35 ° C temperature is recommended.
 
The specified field of application and instructions for use · Do not run out.
 
· Application Clean your tools with water immediately after use.
 
· For more information, please request product safety data sheet.
 
· All other applications and for technical questions about the conditions please consult us.
 
 
 
Certificate of Conformity
 
  TS 7847 conforms to.

The above data have been obtained in laboratory. For more information, please consult our Technical Department.
 
Integrated reserves the right to change the above information.
 
Not responsible for any errors that may result from incorrect practices are integrated.

 

© ENTEGRE Tüm Hakları Saklıdır.