ACRYLIC EXTERIOR PAINT FINISH
TECHNICAL DATA SHEET
INTEGRATED ACRYLIC EXTERIOR PAINT FINISH
Acrylic Emulsion Based on the high coverage Own Water Based Exterior Paint Value
APPLICATION
Conventional plaster, concrete, gas concrete, concrete , particle board, fiber cement , brick, putty and painted exterior surfaces, decorative and protective surface coating used.
 
PROPERTIES
Acrylic binder structure breathable ( water vapor permeability ) having
Low water absorption
Atmospheric conditions , solar radiation, friction and wear-resistant, protects the surfaces
Dirt -repellent properties providing protection and aesthetic appearance
Applications with ease
With high closing force
With good adhesion to the surface applied to
It has a high service life
 
APPLICATIONS
SURFACE PREPARATION
Application surface , mold oil, dust, paint and adherence reducing material must be purified .
Repair cracks and holes prior to application of the same material or a suitable repair mortar should be done with Integrated .
The newly builtconventional plastered surfaces . 21 days ( 20 ° C) for drying plaster should be expected.
 
PRODUCT PREPARATION AND APPLICATION
Newly plastered surfaces before painting INTEGRATED SILICON -BASED EXTERIOR ACRYLIC PRIMER must be applied .
INTEGRATED ACRYLIC EXTERIOR PAINT FINISH surfaces prepared by volume thinned with 10-20% water should be applied by brush or roller in the second floor and between floors medium heat, moisture , depending on a minimum of 6 hours.
 
 
 
CONSUMPTION
10-12 sqm on one floor with 1 liter
 
 
TECHNICAL SPECIFICATIONS

View

Matt and color

The chemical structure

Acrylic emulsion

Density

1,60 ±0,02 g/m³

The drying time ( 20 C de %50 RH)

Min 24 saat (20°C,%50 RH)

Recoat time

Min 6 saat (20°C,%50 RH)

Thinner

Water

Thinning rate

%10-20

Recommended practice times

2 layer (the lower surface may vary depending on the condition)

 

 
PACKAGING AND STORAGE
 
· 15 liters' health are shipped in plastic packaging.
 
· Dry and frost-free environment must be stored in unopened original packaging.
 
 
 
WARNINGS
 
· Before use in paint cans should be mixed until homogenous.
 
· Application of +5 ° C to +35 ° C temperature is recommended.
 
The specified field of application and instructions for use · Do not run out.
 
· Application Clean your tools with water immediately after use.
 
· For more information, please request product safety data sheet.
 
· All other applications and for technical questions about the conditions please consult us.
 
 
 
CERTIFICATE OF CONFORMITY
 
  TS 7847 conforms to.

The above data have been obtained in laboratory. For more information, please consult our Technical Department.
 
Integrated reserves the right to change the above information.
 
Not responsible for any errors that may result from incorrect practices are integrated.
 

 

© ENTEGRE Tüm Hakları Saklıdır.