ORANGE ADHESIVE

ORANGE ADHESIVE

 

APPLICATION

Coarse and fine plaster, concrete, brick, etc.. surfaces of the plates used for bonding polystyrene and mineral wool.

 
PROPERTIES
XPS, EPS and Rockwool is ideal bonding. 
Provides high bonding performance.

 

SURFACE PREPARATION

Application surface mold oil, paint, dust, soil should be cleaned. Low adherence moving parts must be removed. After moistening the surface is ok to practice

 

PREPARATION AND APPLICATION OF CHARGES 

Amount of water (6 to 6.75 liters water/25 kg. Bags) is placed in a mixing bowl. Adding the powder material is mixed with a low-speed hand mixer. 5 min. inlendiril mortar is mixed until homogenous consistency. Funding will be adhered area of thermal insulation boards around 4-5 cm. wide and 1 cm. thickness is applied with a trowel. The appropriate amount of slurry in the middle parts are placed, as a point. A suitable pressure plates are glued to the floor. Funding received sufficient curing is done by mechanical fixing. 

 

CONSUMPTION

4,5 kg/m²

 

TECHNICAL SPECIFICATIONS

 


 

Dry Unit Weight, kg/m3

≥ 1000

Bonding Strength, N/mm2:

≥0,1

Average Compressive Strength, N/mm2

> 6

Average Bending Strength, N/mm2

> 2

Bonding Strength (Adhesion to Substrate) N/mm2

≥ 0,5

Adherence resistance (Thermal Insulation Board Adhesion) N/mm2

≥ 0,08

At the end of 30 min Water Absorption (gr)

≤5 gr

Eventually 240 min Water Absorption (gr)

≤10 gr

Reaction to Fire Class

A1

Above 1 mm Grain Size

Max %1,0

 

 

PACKAGING AND STORAGE

·        25 kg. ' Polyethylene reinforced kraft bags , if desired pallet or sling -bag shipped.

·         Dry and frost-free environment in unopened original packaging , put on top of more than 8 1 year from date of manufacture if , after opening the bag to be consumed in one week is recommended.

·         When not in use containers tightly closed.

 

WARNINGS

·        In mortar prepared no foreign materials ( lime, cement , gypsum, etc. . ) Should be added 

·        The date of expiry mortar , mixed with water or dry mortar should not be used again .

·         Application of +5 ° C to +35 ° C temperature is recommended .

·         Do not apply on frozen surfaces .

·         Do not apply under direct sunlight .

·         The application field and to opt out instructions .

·         Do not inhale . In case of contact with eyes, rinse immediately with plenty of water , seek medical advice if necessary .

·         For more information, please request product safety data sheet .

·         All other applications and for technical questions about the conditions please consult us

 

CERTIFICATE OF CONFORMITY

 

       
   
     
 

 

 

 

           TSEK 112

 

The above data have been obtained in laboratory. For more information, please consult our Technical Department. 
Integrated reserves the right to change the above information. 
Not responsible for any errors that may result from incorrect practices are integrated.
© ENTEGRE Tüm Hakları Saklıdır.