TR
References DEALER PORTAL
TR
  ADHESIVES and JOINT FILLERS ACRYLIC BASED CERAMIC ADHESIVE KAROFiX AKRiLiK®

PRODUCTS

KAROFiX AKRiLiK®Acryllic-Based High Performance Ready-Mixed Ceramic Adhesive

APPLICATION FIELD

  • Provides perfect results in fixing of coatings such as ceramics, tiles, traditional tiles, glass mosaics, etc. to the interior/exterior walls,
  • In wet areas such as bathrooms, kitchens,
  • In affixing ceramics over ceramics,
  • In fixing to the precast concrete, plasterboard and gypsum plastered walls.

REQUIREMENTS

  • Ready to use.
  • Has a long application time on surface.
  • Provides a flexible adhesion layer.
  • Odourless.
  • Not affected by humidity.

TECHNICAL VALUES

Material Structure

Acrylic-based bond and mineral filler

Colour

White

Density, g/cm3

1,70 ± 0,05
Shear tensile strength, 
N/mm2 (28 days)

≤ 1,00

Joint filling period, days

Min. 3

Application thickness, mm

Max. 3

Service temperature, ºC

-10 / +70

Period for keeping uncovered

20 minutes

Sliding (mm)

Yok

Wetting capability, %

Min 90

Full curing period, days

28

Floor temperature, ºC

+10 / +25

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface shall always be free of form oil, dust, paint and materials that reduce adherence.
  • The application surface shall be solid, able to carry load, dry and free of dust.
  • Moving parts with low adherence shall be moved away from the surface.

PREPARATION of the MORTAR  

  • KAROFİX AKRILIK® shall be applied on the surface as a thin layer with the flat side of the scraper.
  • KAROFİX AKRILIK® shall be applied at a single direction on an area that may be coated within 20 minutes, which is its storage period with an open package, so that it whole surface shall have the same
  • thickness.
  • While placing the ceramics, they shall be floated in the adhesion tray to ensure that they contact the adhesion layer.
  • Application is completed by leaving a joint gap of 2.5 mm minimum.
  • Suitable Entegre Joint Fillers shall be used for filling of the selected joint hole.
  • Application of joint filler may be performed approximately 4 days after the application of the ceramics.

CONSUMPTION

1.7 kg/m² for 1 mm of thickness (≤100 cm² ceramic coatings)
We recommend you not to apply a thickness over 3 mm.

PACKAGING

5 kg plastic bucket

15 kg plastic bucket

STORING

1 Year Shelf Life*

*Serin ortamlarda

CERTIFICATE OF CONFORMITY

TS EN 12004-1/ April 2017  Complies with D2 Class.
D2: Advaced dispersion adhesive.
Ministry of Public Works Pos. No: 04.013/1

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Storage and application areas shall be ventilated.
  • Freezes under -10ºC. Frozen material shall be left for thawing in a hot environment and shall be mixed well before using.
  • Application of joint filler shall be performed 7 days after the adhesion of the ceramics over ceramics.
  • For interior walls, coating area ≤ 1,100 cm² (maximum 12 m); for exterior walls, coating area ≤ 110 cm² (maximum 6 m)
  • We recommend you to take additional mechanical precautions for heights over 6 m.
  • We recommend you not to apply a thickness over 3 mm.
  • Work area shall be heated when the application temperature is below 5ºC.
  • Work area shall be heated when the floor temperature is below 5ºC.
  • KAROFIX AKRILIK® applied at 23ºC reaches its final strength 24 days later; this period may extend at lower temperatures.
  • You shall prefer our cement-based products for fixing of covering materials with a larger size and lower absorption rate on floor applications.
  • It is not recommended for continuously wet floors such as pools.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE