TR
References DEALER PORTAL
TR
  THERMAL INSULATION SOLUTIONS ORANGE PACKAGE SYSTEM TURUNCU PAKET® DECORATIVE COATING PLASTER

PRODUCTS

TURUNCU PAKET® DECORATIVE COATING PLASTERMineral Based Decorative Coating Plaster

1.5 -2 mm Thickness Options

APPLICATION FIELD

Cement based decorative coating material ssed as final coat on the exterior façades and termal insulation systems of all buildings.

REQUIREMENTS

  • Provides high resistance against water and frost.
  • Has a natural and decorative appearance.
  • Applied easily.

TECHNICAL VALUES

Shininess

No value required

Dry Film Thickness

> 400; E5

Grain Size, mm

> 1500 S4

Water Vapour Transmission Rate, g/(m².day)

V0

Water Transmission Rate, kg/(m2.saat0.5)

W0

Crack Bridging

A0

CO2 Permeability

C0

Resistance To Mould Growth

K2

TS EN 1062-1

E5

S4

V0

W0

A0

C0

K2

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • Application surface shall be dry, clean, free of dust and solid.
  • After at least 48 later than the TURUNCU PAKET® REINFORCEMENT PLASTER is applied (after the surface is dried completely), TURUNCU PAKET® COATING PLASTER is applied to the surface.

PREPARATION of the MORTAR  

  • A proper amount of water shall be put inside the mixing vessel (7-7.5 l water/25 kg of powder).
  • Powder material shall be added and stirred with hand mixer at low speed.
  • After resting for 5 minutes, the plaster shall be stirred until achieving a homogeneous mixture.
  • The mortar prepared shall be applied on the surface at an equal thickness with a steel trowel.
  • Application thickness shall be adjusted considering the size of the largest grain in the material.
  • Pattern is applied on the surface with circular movements using a plastic or polyurethane trowel.
  • Ensure that the material is used without interruption on wide surfaces.

CONSUMPTION

Fine Class Product: 2.5 kg/m2
Thick Class Product: 2.7 kg/m2

PACKAGING

25 kg polyethylene-reinforced kraft paper bags,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS 7847 / June 2012 
Ministry of Public Works Pos. No: 04.476/A

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
  • TURUNCU PAKET® DECORATIVE COATING PLASTER shall be applied at least 5 days (varies as per seasonal conditions) later than the application of the plaster.
  • Surface shall be watered in specific intervals within 3 days after the application to ensure the strength of plaster depending on the weather conditions.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • TURUNCU PAKET® DECORATIVE COATING PLASTER shall be protected against quick drying under windy weather conditions.
  • It shall not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE