APPLICATION
SURFACE PREPARATION
Surface to be treated; mould oil, dust, paint, such as materials must be cleaned.
Before application, wide cracks and deep holes should be fixed with suitable repairing mortars.
If necessary, surface should be moistured before application.
APPLICATION
Firstly, add water to the mixing bowl, then add the Multifinish (approximately 11 lt water for 25 kg bag) and mix until the lumps go away. Wait 5 minutes, and mix again to obtain a homogeneous mixture. Plaster is applied to the surface by a steel trowel with a thickness of 2-3 mm. Before painting, the surface is finished with a fine sandpaper.
CONSUMPTION
COVERAGE
10m²/bag for 2 mm thickness.