TR
References DEALER PORTAL
TR
  ADHESIVES and JOINT FILLERS GROUTING MORTAR FUGAFIX® GENİŞ SİLİKONLU

PRODUCTS

FUGAFIX® GENİŞ SİLİKONLUSilicone enhanced, high performance cement based ready mix wide elastic joint filler

5 Different Colour Options for a Thickness of 6-15 mm

APPLICATION FIELD

Used for filling of 6-15 mm joints of ceramic and tile coating materials on horizontal and vertical floors in interior and exterior areas in dry and medium wet environments.

 

REQUIREMENTS

Applied easily.
It has a smooth appearance.
Used conveniently on interior and exterior surfaces both vertically and horizontally. Water-repellent in high rate
Resistance against water and freeze

 

TECHNICAL VALUES

Application time, hours

< 2

Water absorption, after 30 minutes, gr (EN 12808-5)

≤  2

Water absorption, after 240 minutes, gr (EN 12808-5)

≤  5

Shrinkage, mm/m (EN 12808-4)

≤  3

Flexural Strength (after 28 days), N/mm2 (EN 12808-3)

≥  2,5

Flexural Strength (after freze/thaw cycles), N/mm2 (EN 12808-3)

≥  2,5

Compressive Strength (after 28 days), N/mm2 (EN 12808-3)

≥  15

Compressive Strength (after freze/thaw cycles), N/mm2 (EN 12808-3)

≥  15

Abrasion Resistance, mm3 (EN 12808-2)

≤1000

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION
Scrape any dust, chipping, construction-cement waste that may be present inside the joint hole and clean with a brush before application. Joint hole shall be dampened with water before application, if required.

 

CONSUMPTION

 

Consumption Amount (g/m2)*

Ceramic Size(cm)

Joint Gap (mm)

6 mm(g/m2)

10 mm (g/m2)

15 mm (g/m2)

10*20

 
1000
 
1730
 
2590

15*15

 
920

1530

 
2300
 
15*20

800

1340

 
2000
 
20*20

690

1150

 
1730

20*25

1000

1650

 
2490

20*30

920

1530

 
2300

33*33

670

1110

 
1680

 

PACKAGING

  • It is shipped in 25 kg kraft bags, on pallets..

 

STORING

  • Storage period; It is recommended to be consumed in 6 months from the date of production if

    stored in its original package without opening the package under dry, frost free conditions and is

    stacked as maximum 8 bags, and in 1 week after opening the package.

  • Packages shall be tightly closed when it is not used.

 

CERTIFICATE OF CONFORMITY

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.

  • Plaster shall not be used again by mixing with water or dry plaster if its application time has

    expired.

  • You shall wait at least 24 hours for joint application after fixing operation.

  • We recommend that the application shall be performed between +5°C and +35°C.

  • It shall not be applied on frozen surfaces.

  • Do not apply under direct sunlight.

  • PRIMEL 300® shall be used for cleaning of the contaminated joints.

  • To prevent damage to the coloured joint fillings, do not use strong chemical cleaning agents

    such as lime remover, hydrochloric acid, etc.

  • Do not go beyond the application field and the rules.

  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek

    medical attention if required.

  • For detailed information, please request the security data sheet.

  • Contact us for your technical questions and for your questions about all other application

    conditions.

 

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE