TR
References DEALER PORTAL
TR
  WATERPROOFING SOLUTIONS POLYURETHANE BASED SUTOP® PRiMEL PU

PRODUCTS

SUTOP® PRiMEL PUSingle Component Polyurethane Based Primer Developed for Absorbent Surfaces

APPLICATION FIELD

Used for fixing dusting and crumbling surfaces, on absorbent surfaces such as wood, concrete etc., for increasing the wear resistance of mineral based surfaces and to achieve high adherence on the surfaces to be coated with polyurethane.

REQUIREMENTS

  • Easy to apply.
  • Fills in the non-structural capillary cracks by reducing the water absorption ratio of the concrete structure.
  • It is transparent and contains solvents.
  • It is not affected by weather conditions (-30 ºC/+120 ºC)
  • Resistant to salt water, salt solutions, bases, diluted acids, aliphatic solvents, gasoline and mineral oils. Resistant to abrasion and water.
  • Penetrates deeply into all mineral and concrete surfaces and hardens the top surface of the concrete. Provides a two level protection as it ensures permanent water impermeability on the surface.
  • Provides an impermeable surface by filling the pores on the surfaces such as aerated concrete, etc.

TECHNICAL VALUES

Material Structure

Polyurethane

Colour

Clear

Drying Time

3-8 hours

Application Temperature

> +5 °C

Full Curing Period

120 minutes

* The values above are given for a temperature of +23 °C and a relative humidity of 50%. High temperatures reduce the time. Low temperatures increase the time

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • All application surfaces shall be dry, clean and free of dust.
  • The materials on the surface shall be free of any foreign material such as dirt, oil, grease, coating and surface curing materials, etc. 
  • Surfaces applied with bitumen, tar and acrylic shall be cleaned so that no residues are left.

PREPARATION of the MORTAR  

  • SUTOP® PRİMEL PU shall be applied to the floors, where surface preparation is complete, with a brush. 
  • The product reacting with moisture shall be applied by transferring the amount to be used only and the primed surface shall be protected from water for 3-4 hours.
  • It may be applied in 2 coats depending on the absorption ratio of the floor, but you shall wait approximately 2-3 hours between the applications.
 

CONSUMPTION

100 - 200 gr/m2

PACKAGING

15 kg canisters

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

CERTIFICATE OF CONFORMITY

RECOMMENDATION

  • Contains solvents, combustible.
  • Do not approach with open flames and do not smoke during application.
  • Work in open and adequately ventilated areas only.
  • Keep in mind that a solvent odour may occur in confined spaces.
  • Storage conditions shall be considered while it is transported.
  • Work clothing, protective gloves and goggles conforming with the Occupational Health and Safety Rules shall be used during the application.
  • In case of contact with your skin, wash with plenty of soapy water.
  • Do not swallow, do not use empty packages to store food and do not throw them in fire.
  • Food and drinks shall not be allowed in application areas.
  • Shall be stored away from the children.
  • Do not go beyond the application field and the rules.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE