TR
References DEALER PORTAL
TR
  CEMENT BASED PLASTERS FACADE PRODUCTS FiNTEK®

PRODUCTS

FiNTEK®Cement-Based Thin Finishing Plaster

APPLICATION FIELD

Applied as a thin finishing plaster on traditional and ready-mixed cement-based plaster applications both on interior and exterior surfaces.

REQUIREMENTS

  • Provides a smooth surface for final coating.
  • Provides cost advantage.
  • It can be easily and rapidly applied.

TECHNICAL VALUES

Dry Bulk Density of Hardened Mortar, kg/m³

1600 ± 300

Compressive Strength, N/mm²

≥ 6,0 (CS IV)

Adhesive Strength, N/mm²

≥ 0,2 (FP:B)

Capillary Water Absorption, kg/m² min0.5

W0

Water Vapour Permeability Coefficient, µ

≤ 25

Average Thermal Conductivity, W/m.K (λ10,dry)

≤ 0,93

Reaction to Fire

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface will always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes should be made using appropriate Entegre Repair Mortars before application.
  • Application surface should be dampened with water, if required.

PREPARATION of the MORTAR  

  • FINTEK® should be mixed with ready-mix plaster mixer or by hand (4.5-5,5 lt water/25 kg bag).
  • Application thickness should be between 3 -10 mm for one coat and it will be applied using a plastering trowel.
  • The surface of the plaster will be polished when the plaster becomes hard enough and the surface will be finished with a damp sponge.
APPLICATION VIDEO For more information, please
watch our application video. WATCH

CONSUMPTION

Approx. 1.7 kg/m² for 1 mm of thickness

PACKAGING

25 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 998-1 / February 2017 / A1-GP-CS IV-W1
Ministry of Public Works Pos. No: 04.476/C

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
  • We recommend the application to be performed between +5°C and +35°C.
  • FINTEK® will be protected against quick drying under windy weather conditions.
  • Surface should be watered in specific intervals within 3 days after the application to ensure its strength.
  • We recommend application of 2 coats to prevent cracking risk due to fast curing when required, particularly for applications performed on summer days.
  • We recommend using fiberglass meshs on the joining areas of different materials and on the points that may be considered to be moving.
  • You should wait at least 10 days for the application be performed on the FINTEK® depending on the ambient temperature.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your further inquires and about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE