TR
References DEALER PORTAL
TR
  THERMAL INSULATION SOLUTIONS EXTERIOR PAINT ENTEGRE SİLİKONLU DIŞ CEPHE BOYASI

PRODUCTS

ENTEGRE SİLİKONLU DIŞ CEPHE BOYASIAcrylic Emulsion Based, Water Based Exterior Paint with Silicone Additive and High Covering Value

APPLICATION FIELD

Used as decorative and surface protection paint on plaster, concrete, aerated concrete, exposed concrete, plasterboard, precast concrete, brick, pasted surfaces and old painted exterior surfaces.

REQUIREMENTS

  • This primer contains acrylic adhesive and silicone additive,
  • Has high breathing capability (water vapour permeability)
  • With low water absorption
  • Resistant to atmospheric conditions, sunlight, friction and abrasion, protects the surfaces it is applied on, preserving the aesthetic appearance with its dirt prevention feature
  • Is easy to apply
  • With high covering capability
  • Adheres well to the surfaces on which it is applied
  • With high service life.

TECHNICAL VALUES

Appearance

Matt and coloured

Chemical Structure

Acrylic emulsion based, added with silicone

Density

1,60 ± 0,012 g/m3

Drying Time

Min 24 hours (20 °C’de % 50 RH)

Waiting Period Between Coats

Min 6 hours (20 °C'de % 50 RH)

Thinner

Water

Thinning Ratio

10-20%

Recommended Coats of Application

Two coats (may differ as per the condition of the sub-surface)

G3

E2

S1

V1

W2

A0

C0

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION 

  • The surface of application shall always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes shall be made with the same material or using appropriate Entegre Repair Mortars before application.
  • It shall be waited for 21 days (at 20 °C) to ensure that the plastered is set on surfaces recently applied with conventional plasters.

PREPARATION and APPLICATION OF THE PRODUCT 

  • ENTEGRE ACRYLLIC-BASED SILICONE EXTERIOR PRIMER shall be applied on the recently plastered surfaces before painting.
  • ENTEGRE ACRYLLIC-BASED SILICONE EXTERIOR PRIMER shall be applied on the prepared surfaces by thinning it with water at 10-20% as two coats using a brush or roll, and you shall wait at least for 6 hours between the coats depending on the temperature and humidity.
 

CONSUMPTION

0.20 - 0.30 l in average at two coats

PACKAGING

15 l plastic packages

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

CERTIFICATE OF CONFORMITY

Ts 7847 / June 2012
Complies with G3-E2-S1-V1-W2-A0-C0 class.

RECOMMENDATION

  • Paint shall be stirred in the package until achieving a homogeneous mixture before using it.
  • We recommend that the application shall be performed between +5 °C and +35 °C.
  • Do not go beyond the application surface and the rules.
  • Clean your application tools used with water immediately after application.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE