TR
References DEALER PORTAL
TR
  CEMENT BASED PLASTERS DECORATIVE PLASTERS FiNEL® DIŞ

PRODUCTS

FiNEL® DIŞCement-Based Final Coat Plaster

APPLICATION FIELD

Used for obtaining a final coat surface on concrete surfaces and polished surfaces on the interior and exterior faces of the buildings. It has a grey colour.

REQUIREMENTS

  • Provides a smooth surface on the final coat.
  • It has polymer additives.
  • Can be used both on interior and exterior surfaces.
  • Resistant to water and freezing.

TECHNICAL VALUES

Brightness

Mat; G3

Dry Film Thickness

> 400; E5

Grain Size, mm

< 1500; S3

Water Vapour Transmission Rate, g/(m².day)

15<V2≤150

Water Transmission Rate, kg/(m².hour0.5)

0,5≥W2>0,1

Crack Bridging

A0

CO2 Permeability

C0

Resistance to Mould Growth

K2

TS EN 1062-1

G3

E5

S3

V2

W2

A0

C0

K2

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface of application will always be free of materials such as form oil, dust, paint, etc.
  • Moving parts with low adherence should be moved away from the surface.
  • You can advance to application after dampening the surface.
  • Precautions against dusting should be taken on plastered surfaces.

PREPARATION of the MORTAR  

  • A proper amount of water will be put inside the mixing vessel (7.5-8.5 l water/25 kg bag). 
  • Powder material will be added and stirred with hand mixer.
  • After resting for 5 minutes, the plaster should be stirred until achieving a homogeneous mixture.
  • The mortar prepared should be applied with a steel trowel.
  • Application thickness should be 2-3 mm.
  • It should be applied as two coats for thicker applications and the second coat should be applied when the first coat is set adequately.
 

CONSUMPTION

1.3 kg/m² for 1 mm of thickness

PACKAGING

25 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS 7847 / June 2012 /G3-E5-S2-K2

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
  • Plaster should not be used again by mixing with water or dry plaster if its application time has expired.
  • FINEL® DIŞ will be applied at least 7 days later than the application of the plaster.
  • We recommend the application to be performed between +5°C and +35°C.
  • FINEL® DIŞ will be protected against quick drying under windy weather conditions.
  • It should not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE