TR
References DEALER PORTAL
TR
  COMPLEMENTARY AND AUXILIARY PRODUCTS SURFACE PREPARING PRiMEL®

PRODUCTS

PRiMEL®Cement-Based Primer

APPLICATION FIELD

Used by mixing with water on aerated concrete and pumice concrete surfaces before application of cement-based plasters. Besides being used directly on bright fair faced concrete surfaces, it is used by mixing with PRIMEL 200® (PRIMEL 200® /Water: 1/3) on concrete ceilings and walls

REQUIREMENTS

  • Provides a firm ground during the preparation of the surface before plastering.
  • Provides cost advantage.
  • It may be easily and rapidly applied.

TECHNICAL VALUES

Dry Bulk Density of Hardened Mortar, kg/m³

1800 ± 200

Compressive Strength, N/mm²

≥ 6,0 (CS IV)

Adhesive Strength, N/mm²

≥ 0,3 (FP:A)

Capillary Water Absorption, kg/m².min0.5

W0

Water Vapour Permeability Coefficient (µ)

≤ 25

Average Thermal Conductivity, W/m.K

≤ 1,17

Reaction to Fire

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface shall always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes shall be made using appropriate Entegre Repair Mortars before application.
  • Application surface shall be dampened with water, if required.

PREPARATION of the MORTAR  

  • PRIMEL® shall be mixed with water or with PRIMEL 200® using a power mixer.
  • (13-14 l PRIMEL 200®/50 kg bag or 12.5-13.5 l water/50 kg bag).
  • After resting for 5 minutes, it shall be stirred until achieving a homogeneous mixture.
  • PRIMEL® shall be applied with trowel or trolien.

CONSUMPTION

Approximately 3.5-4 kg/m² with trowel, and approximately 2.5-3 kg/m² for trolien.

PACKAGING

50 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 998-1 / February 2017 / A1-GP-CS IV-W0

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • PRIMEL® shall be protected against quick drying under windy weather conditions.
  • You shall wait at least 1 days for the application be performed on the PRIMEL® depending on the ambient temperature.
  • Surface shall be watered in specific intervals within 1 days after the application to ensure its strength.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE