APPLICATION FIELD
GIPSFIX is a gypsum-based joint filler suitable for interior applications and used for filling gypsum board joints.
REQUIREMENTS
· Suitable for interior applications.
· Provides easy, convenient and fast application.
· Thanks to the special additives in its formulation, it provides high adhesion and strength.
· Provides additional resistance to cracking.
· Provides a smooth and even surface.
APPLICATION
Surface Preparation
The application surface must be free of formwork oil, dust, paint and similar substances. The application surface must be dry and protected against moisture.
Mortar Preparation and Application
First, water is poured into a clean mixing container, then GIPSFIX is added (approximately 15-16 L of water for a 25 kg bag) and mixed until all lumps are completely eliminated. Allow the mixture to stand for 5 minutes, then mix again to obtain a homogeneous consistency.
The prepared GIPSFIX is applied to gypsum board joints so as to embed the joint tape, followed by a second coat to completely fill the tapered edges of the boards. If necessary, additional coats may be applied after allowing each coat to fully set.
CONSUMPTION
Approx. 1 kg/m² (for 2 mm application thickness).
RECOMMENDATION
· No foreign material (lime, cement, gypsum, etc.) should be added to the prepared mortar.
· Application is recommended at temperatures between +5 °C and +35 °C.
· Do not use outside the specified areas of application or contrary to the instructions for use.
· Do not inhale directly. In case of contact with eyes, rinse with plenty of water and seek medical advice if necessary.
· For further information, request the product Safety Data Sheet.
· Please consult us regarding all other application conditions and for technical questions.