TR
References DEALER PORTAL
TR
  THERMAL INSULATION SOLUTIONS THERMAL INSULATION PRODUCTS FiNKOT®- E

PRODUCTS

FiNKOT®- ECement-Based High Performance Termal Insulation Board Plaster With Fiber Additives

APPLICATION FIELD

Used for coating of termal insulation board such as polystyrene or STONEWOOL and exterior dry wall systems

REQUIREMENTS

  • It may be applied on XPS, EPS and STONEWOOL.
  • May be used for coating of exterior dry wall systems.
  • Provides a smooth surface.
  • It has polymer additives.
  • Features flexibility thanks to its fiber additives, minimizes the surface cracks.

TECHNICAL VALUES

Adhesive Strength, N/mm²

≥ 0,2

Shininess

Matt;  G3

Dry Film Thickness

> 400; E5

Grain Size, μm

< 1500; S3

Water Vapour Transmission Rate, g/(m².day)

15<V2≤150

Water Transmission Rate, kg/(m².hour0.5)

W2

Crack Bridging

A0

CO2 Permeability

C0

Resistance To Mould Growth

K2

TS EN 1062-1

G3

E5

S3

V2

W2

A0

C0

K2

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

PREPARATION of the MORTAR  

  • A proper amount of water shall be put inside the mixing vessel (6-6.75 l water/25 kg bag).
  • Powder material shall be added and stirred with hand mixer at low speed.
  • After resting for 5 minutes, the plaster shall be stirred until achieving a homogeneous mixture.
  • One coat of mortar (3 mm) shall be applied on the plate affixed in advance with a steel trowel.
  • Reinforcement net shall be placed by stretching it and without folding it, and the connection points of the net shall be overlapped. 
  • Net shall be applied with a steel trowel to ensure the contact of fresh mortar with the net.
  • Second coat (2 mm) of plaster shall be applied after applying the plaster. A steel trowel is recommended to finish the surface.
  • Sponge float may cause dusting of the surface.

CONSUMPTION

4,5 kg/m² (for 5 mm of thickness)

PACKAGING

25 kg polyethylene-reinforced kraft paper bags,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS 7847 / June 2012 / G3-E5-S3-V2-W2-A0-C0-K2
Ministry of Public Works Pos. No: 04,481

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
  • Surface shall be watered in specific intervals within 3 days after the application to ensure the strength of plaster depending on the weather conditions.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • FINKOT®-E shall be protected against quick drying under windy weather conditions.
  • It shall not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE