TR
References DEALER PORTAL
TR
  COMPLEMENTARY AND AUXILIARY PRODUCTS SURFACE PREPARING PRiMEL 100®

PRODUCTS

PRiMEL 100®Acryllic Resin Based Performance Enhancing Primer Used On Absorbent Surfaces

APPLICATION FIELD

  • Used as a primer before application of ceramic adhesives, cement-based topcoat plasters and pastes on surfaces that are not resistant to moisture such as gypsum-cardboard plates, gypsum plasters, fiberboard etc.
  • It is used as a primer for the prevention surface dusting and protection of cement-based applications (plaster, screed).
  • It is used for applying primer on aerated concrete, plaster and brick surfaces to prevent cracking due to rapid water absorption of surfaces prior to plaster applications.

REQUIREMENTS

  • Provides high performance in preventing cracks.
  • Improves performance on plaster and ceramic applications on absorbent surfaces.
  • Prevents dusting on cement-based plaster and screed surfaces.

TECHNICAL VALUES

Density, kg/l

1

Colour

Blue

Application Time for Second Coat, hours

2

Drying Time, Hours

2

Adhesion Strength  N/mm2

> 1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

  • Before application of ceramic adhesives, cement-based topcoat plasters and pastes on surfaces that are not resistant to moisture such as gypsum-cardboard plates, gypsum plasters, fiberboard etc.,;
    • PRİMEL 100® shall be mixed with water at a ratio of 1/1 for the first coat before application, and it shall be applied directly with a brush for the second coat. You may advance to next step when it is dried. 
  • For the prevention surface dusting and protection of cement-based applications (plaster, screed);
    • It shall be applied on the dry surface with a brush by mixing with water with a ratio of 1/3 for the first coat and with water with a ratio of 1/1 for the second coat.
    • You may advance to next step when it is dried. 
  • For applying primer on aerated concrete, plaster and brick surfaces to prevent cracking due to rapid water absorption of surfaces prior to plaster applications;
    • it shall be applied with a brush by mixing with water with a ratio of 1/1.
    • You may advance to next step when it is dried. 

CONSUMPTION

  • Alçı, alçı levha, alçı sıva, sunta vs. gibi neme karşı dayanıksız yüzeylere uygulanan seramik yapıştırıcı, çimento esaslı son kat sıvalar, macunlar öncesinde;
Consumption: Approximately 120 g/m²
  • Çimento esaslı uygulamaların (sıva, şap) yüzey tozumalarının engellenmesi ve korunması için;
Consumption: Approximately 100 g/m²
  • Sıva uygulamalarından önce, yüzeylerin hızlı su emmesinden kaynaklanabilecek çatlamaların engellenmesi için;
Consumption: Approximately 50 g/m² 

PACKAGING

3 l and 10 l plastic drums

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

CERTIFICATE OF CONFORMITY

TS 13744/ Mart 2017 / Sınıf 2
Dolgu Malzemesiz Aderans Arttırıcı Astar

RECOMMENDATION

  • We recommend that the application shall be performed between +5°C and +30 °C.
  • The application surface shall be dry, clean and free of dust.
  • It shall be protected from freezing.
  • All tools used shall be washed with water after application.
  • When inhaled, it is harmful to health.
  • Keep away from the children.
  • Keep it in a container that is closed tightly.
  • Avoid contact with eye and skin.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE