TR
References DEALER PORTAL
TR
  ADHESIVES and JOINT FILLERS ADHESIVE MORTARS KAROFiX® POOL

PRODUCTS

KAROFiX® POOLCement-Based High Performance Ceramic Adhesive Mortar Developed For Pools

APPLICATION FIELD

  • Used for coating of humid areas such as swimming pools, baths, saunas, spa centers, water tanks, terraces, roofs etc.
  • May also be used for coatings such as ceramic, porcelain ceramic, granite, etc. at all sizes on horizontal and vertical surfaces in the interior/exterior areas thanks to its high performance.

REQUIREMENTS

  • Suitable to be used in areas with differences in temperatures. Resistant to water and humidity.
  • Reduced sliding properties.
  • Provides a good performance with its elasticity.
  • It has polymer additives.
  • Provides high performance while affixing ceramics over ceramics.

TECHNICAL VALUES

Period for Keeping Uncovered: Tensile Adhesion Strength, N/mm² (after 30 minutes minimum), (EN 1346)

≥ 0,5

Application Time, Hours

< 2

Adherence Strength / Under Dry Conditions, N/mm² (EN 1348)

≥ 1

Adherence Strength / Under Wet Conditions, N/mm² (EN 1348)

≥ 1

Adherence Strength / Under Hot Conditions, N/mm² (EN 1348)

≥ 1

Adherence Strength / Under Cold Conditions, N/mm² (EN 1348)

≥ 1

Sliding, mm (EN 1308)

≤ 0,5

Reaction to Fire 

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface shall always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes shall be made using appropriate Entegre Repair Mortars before application.
  • Application surface shall be dampened with water, if required.
  • PRIMEL 100® shall be applied before application on surfaces that are not resistant to moisture such as plasterboard, cardboard, gypsum plasters etc. and PRIMEL 600® BETOKONTAK shall be applied for applications of ceramics over ceramics, and the fixing operation is started when drying is complete (after approx. 24 hours).

PREPARATION of the MORTAR  

  • Water shall be put to the mixing vessel first, then KAROFIX® POOL shall be added (5.75-6.25 l water/25 kg bag) and it shall be stirred until the lumps are removed.
  • Stop for 5 minutes, and stir again to achieve a homogeneous mixture.
  • The mortar prepared shall be applied up to a thickness of 8 mm, it shall be combed and ceramic shall be fixed.
  • For a good adhesion, application shall be performed by applying force on the surface with a rubber hammer.
  • Double sided fixing shall be used for coatings greater than 3,600 cm2.
APPLICATION VIDEO For more information, please
watch our application video. WATCH

CONSUMPTION

Applies for application on a single side.

Comb Size

Consumption (kg/m2)

3

2-3

4

3-4

6

4-5

8

5-6

 

PACKAGING

25 kg polyethylene-reinforced kraft paper bags

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 12004-1/ April 2017 Complies with C2TE T Class.
C2: Cement-based adhesive enhanced with additional characteristics
T: Reduced sliding properties
E: Extended period for keeping uncovered
Ministry of Public Works Pos. No: 04.013/1

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
  • You shall wait at least 24 hours for joint application.
  • May be used for coatings with water absorption of ≤0.5 and > 0.5 (ceramic, granite and porcelain ceramic, marble, etc.).
  • Coating areas specified below are suitable for an ideal application:
    • On interior walls and interior/exterior floors: Coating area ≤3600 cm²
    • On exterior walls: Coating area ≤1200 cm² (12m height)
    • On exterior walls: Coating area ≤2000 cm² (8m height).
    • On exterior walls: Coating area ≤3600 cm² (4m height)
  • KAROFIX® POOL White is recommended for light coloured applications.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • For an ideal application, coating material shall be fixed to the mortar applied on the surface within 35 minutes.
  • We recommend you to take additional mechanical precautions for heights over 8m.
  • It shall not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application surface and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE