Applied on light duty floors not subject to heavy traffic garages, workshops, warehouses and residences, and a variety of old and new concrete surfaces, floor coverings and used in preparation of bringing the desired smoothness
CHARACTERISTICS Seals the roughness of substrate and forms a smooth surface. It takes its first setting within 3 hours. Provides strong ground with its high adhesion. Provides an appropriate basis in balance before coating with carpet, flooring, epoxy, ceramic, PVC, etc. Applied to thickness between 3-30 mm.
APPLICATION SURFACE PREPARING The surface must be strong and dry. In every case, the surface must be cleaned from dust, oil and paint. Old surfaces must be repairs with appropriate Entegre product before application. Before the application, Primel SL (Primer) must be used. When primer gets dry, FLOORSER® 3-30 mm is applied. MORTAR PREPARING AND APPLICATION FLOORSER® is mixed by hand or preferably with an electrical drill (5,5-6 lt water/ 25 kg bag) for 3-5 minutes. Should be waited for 4-5 minutes and then mixed again for 1 minute. After, fuild mixture laid on the surface. Bubbles should be removed by a spiked roller. If there is more than 24 hours between the two coats, primer should be applied on the first coat again.
For questions, requests and suggestions, you may contact us on weekdays between 07:00 - 16:00.