APPLICATION FIELD
BOARDFIX is a gypsum-based adhesive designed for bonding and fixing gypsum boards to wall surfaces.
REQUIREMENTS
· Suitable for interior applications.
· Provides easy, convenient and fast application.
· Provides high adhesion and strength thanks to the special additives in its formulation.
· BOARDFIX is classified as an A1 non-combustible material.
APPLICATION
Surface Preparation
The application surface must be free from formwork oil, dust, paint and similar substances. The application surface must be protected against moisture and kept dry.
Mortar Preparation and Application
First, water is poured into a clean mixing container, then BOARDFIX is added (approximately 13 L of water for a 25 kg bag) and mixed until all lumps are completely eliminated. Allow the mixture to stand for 5 minutes, then mix again to obtain a homogeneous consistency.
The prepared mortar is applied to the back of the gypsum board in dabs approximately 10 cm in diameter, spaced at 30-40 cm intervals. The gypsum board is then properly aligned using a spirit level and fixed by pressing it onto the wall surface.
CONSUMPTION
Approx. 4 kg/m².
RECOMMENDATION
· No foreign material (lime, cement, gypsum, etc.) should be added to the prepared mortar.
· Application is recommended at temperatures between +5 °C and +35 °C.
· Do not use outside the specified areas of application or contrary to the instructions for use.
· Do not inhale directly. In case of contact with eyes, rinse with plenty of water and seek medical advice if necessary.
· For further information, request the product Safety Data Sheet.
· Please consult us regarding all other application conditions and for technical questions.