TR
References DEALER PORTAL
TR
  TECHNICAL MORTARS MASONRY MORTAR GAZBETONFiX®

PRODUCTS

GAZBETONFiX®Cement-Based Aerated Concrete Masonry Mortar

APPLICATION FIELD

Used for constructing walls with autoclaved aerated concrete (AAC) blocks.

REQUIREMENTS

·       Provides high performance due to its high adhesion.

·       Provides ease of application with sufficient working and open time.

TECHNICAL VALUES

 

Density, kg/m³

1400 ± 200

Workability Time, min

≥ 120

Adjustment Time, min

≥ 5

Compressive Strength, N/mm²

≥ 10,0 (M 10)

Maximum Particle Size, mm

≤ 2

Water Absorption, kg/m².min⁰,⁵

≤ 2,5

Water Vapour Permeability Coefficient (µ)

5/20

Reaction to Fire

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

  • GAZBETONFIX® shall be mixed by hand or preferably with power mixer (8-8.5 l water/25 kg bag). 
  • While preparing the mortar:
    • Water shall be put to the plastic vessel first, then GAZBETONFIX® shall be added and mixed.
    • Stop for 5 minutes, and stir again to achieve a homogeneous mixture.
  • The mortar prepared shall be applied to the vertical and horizontal surfaces with a comb.
  • Ensure that joint thickness is at least 3 mm.
  • Aerated concrete block placed shall be seated by hammering from the top and side.
APPLICATION VIDEO For more information, please
watch our application video. WATCH

CONSUMPTION

2-3 kg/m² (Consumption when the mortar is applied at 3 mm thickness over a 1 m² surface. Consumption according to wall area should be calculated considering block dimensions. Refer to the “Masonry Mortar Consumption Calculation” at the back of the catalogue.)

 

PACKAGING

·       Supplied on pallets in 25 kg kraft bags.

STORING

·       When stored unopened in its original packaging in a dry, frost-free environment, stacked no more than 8 bags high and without direct contact with the ground, the shelf life is 1 year from the date of manufacture. Once opened, the bag should be consumed within 1 week.

CERTIFICATE OF CONFORMITY

TS EN 998-2 / January 2017

Type T (Thin-Layer Masonry Mortar)

Public Works Item No: 10.130.2499

 

RECOMMENDATION

  • ·       Lay the first course level using cement-based mortar.

    ·       Do not add any foreign material (lime, cement, gypsum, etc.) to the prepared mortar.

    ·       Application is recommended at temperatures between +5 °C and +35 °C. Drying time may increase or decrease under different weather conditions.

    ·       Do not use outside the specified areas of application or contrary to the application instructions.

    ·       As this is a cement-based material, do not inhale directly. In case of contact with eyes, rinse thoroughly with plenty of water and seek medical advice if necessary.

    ·       Request the product Safety Data Sheet for further information.

    ·       Please consult us regarding all other application conditions and technical questions.

     

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE