PRODUCTS

ENTEGRE KARTONPiYER ALÇISIMoulding Plaster

APPLICATION FIELD

It is used in casting of requested models for decorative purposed and mounting of decorative gypsum plaster product to wall. It is also used in repair, restoration and renewal in housing and business places thanks to early freezing quality.

REQUIREMENTS

  • Taking shape in mould
  • Breathability
  • Light and durable

TECHNICAL VALUES

Water Value

70/100

Bending Strength, n/mm²

≥ 3,0

Compressive Strength, n/mm²

≥ 10,0

Spread, mm

190 - 200

Set Beginning Time, minute

≥ 8

Set Ending Time, minute

≤ 30

Reaction to Fire

A1

 

APPLICATION

SURFACE PREPARATION  

  • The surface should be free from adherence reducing substances.
  • If necessary, application surface should be moisten with water before application.

PREPARATION of the MORTAR  

  • First water is put into mixing bowl, then ENTEGRE KARTONPİYER ALÇISI (7 Lt water/ 10 kg in product ratio) is spread until all water surface is lined. 
  • 2-3 minutes should be waited for plaster to absorb water and the product is mixed with hand or mixer until being homogeneous.
  • After mixing, mortar is ready to use.
  • Mold is lubricated with mold oil in order to remove gypsum plasters and remove the mold easily.
  • ENTEGRE KARTONPİYER ALÇISI is waited to freeze. 
  • Completely frozen plaster is removed from the mold.

CONSUMPTION

For 1 mm thickness, 1,0 kg/m²

PACKAGING

30 kg and 40 kg PP Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

6 Months Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 13279-2: Complies with C1 class

RECOMMENDATION

  • No foreign substance (lime, cement, gypsum etc.) should be added in the prepared mortar.
  • Mould should be dry and clean before application.
  • Tools used in mixing and mixing water should be clean.
  • High speed mechanical mixer affects consumption and setting time of the product.
  • Application is recommended to be done at a temperature of +5 °C degrees to +30 °C degrees.
  • KARTONPIYER should be protected against rapid drying in windy weather.
  • Comply with the specified application area and operating instructions.
  • Do not breathe directly. In case of contact with eyes, wash eyes with plenty of water, if needed, seek medical advice.
  • Please request the safety data sheet for more information.
  • Please consult us for all other application conditions and technical questions.