SIVAMATiK® İÇCement-Based Machine Applied Plaster For Interior

First Cement-Based Machine Applied Plaster Produced in Turkey


Applied on  brick, aerated concrete, concrete, fair faced concrete, pumice concrete, briquette walls and ceiling surfaces of the interior faces of the buildings.


  • Serves as both the rough plaster and finish plaster.
  • Provides a strong surface with high adhesive resistance and strength.
  • It can be easily and rapidly applied with a plaster machine.


Dry Bulk Density of Hardened Mortar, kg/m³

1550 ± 200

Compressive Strength, N/mm²

≥ 6 (CS IV)

Adhesive Strength, N/mm²

≥ 0,2 (FP:B)

Capillary Water Absorption, kg/m².min0,5


Water Vapour Permeability Coefficient, µ

≤ 25

Average Thermal Conductivity, W/m.K (λ10,dry)

≤ 0,79

Reaction to Fire





  • The surface of applications will always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes should be made with the same material or using appropriate Entegre Repair Mortars before application.
  • Application surface should be dampened with water if required. 
  • Pre-coating will be performed using PRIMEL® for surfaces such as aerated concrete, bricks, etc. 1 day before the application; and using PRIMEL® PLUS for smooth surfaces such as fair faced concrete 1 day before the application.
  • Start application after surface is prepared.


  • SIVAMATIK® İÇ is applied with a plaster machine (9-11 liter water / 50 kg bag) and sprayed to the surface. 
  • Application thickness should be between 1 cm and 2.5 cm in one coat.
  • If the thickness is more than 2.5 cm, a second coat is applied with max. of  2.5 cm thickness after the first coat is set.
  • Surface must be levelled with plastering template.
  • The surface of the plaster will be polished when the plaster becomes hard enough and the surface will be finished with a damp sponge.


Approx. 14,5 kg/m² for 1 cm of plaster thickness


25 kg and 50 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)


1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions


(1 week after opening the package.)


TS EN 998-1 / February 2017 / A1-GP-CS IV
Ministry of Public Works Pos. No: 04.475/A


  • No other materials (lime, cement, gypsum, etc.) should be added to the prepared plaster.
  • Application is performed between +5°C and +35°C.
  • SIVAMATIK® İÇ should be protected against quick drying under windy weather conditions.
  • Fiberglass meshs shall be used on the joining areas of different materials and on the points that may be considered to be moving.
  • Wait at least 10 days for applications to be performed on the SIVAMATIK® İÇ depending on the ambient temperature.
  • Surface should be watered in specific intervals within 3 days after the application to ensure its strength.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your further inquires and about all other application conditions.