TR
References DEALER PORTAL
TR
  COMPLEMENTARY AND AUXILIARY PRODUCTS SURFACE PREPARING PRiMEL PLUS®

PRODUCTS

PRiMEL PLUS®Cement-Based Primer

APPLICATION FIELD

Primer used for increasing adherence on the surface before application of plasters on aerated concrete, pumice concrete bright fair faced surfaces, concrete ceilings and walls.

REQUIREMENTS

  • Polymer modified.
  • Provides a firm ground during the preparation of the surface before plastering.
  • Provides good adhesion with the lower surface and serves as a bond between the plaster to be applied on it and the lower surface.
  • Provides a controlled water absorption transfer between surfaces with high and low water absorption rates.
  • It may be easily and rapidly applied.

TECHNICAL VALUES

Dry Bulk Density of Hardened Mortar, kg/m³

1900 ± 200

Compressive Strength, N/mm²

≥ 6,0 (CS IV)

Adhesive Strength, N/mm²

≥ 0,3 (FP:A)

Capillary Water Absorption, kg/m².min0.5

W0

Water Vapour Permeability Coefficient (µ)

≤ 25

Average Thermal Conductivity, W/m.K

≤1,28

Reaction to Fire

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface shall always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes shall be made using appropriate Entegre Repair Mortars before application.
  • Application surface shall be dampened with water, if required.

PREPARATION of the MORTAR  

  • PRIMEL PLUS® shall be mixed with power mixer or by hand (13-14 l water/50 kg bag).
  • After resting for 5 minutes, it shall be stirred until achieving a homogeneous mixture.
  • PRIMEL PLUS® shall be applied with trowel or trolien.
  • Final surface shall have a thickness of 4-7 mm and a textured surface appearance.
 

CONSUMPTION

Approximately 3.5-4 kg/m² with trowel, and approximately 2.5-3 kg/m² for trolien.

PACKAGING

50 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 998-1 / July 2011 
Complies with A1-GP-CS IV-W0 Class.

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Always consult the technical department about the plaster to be applied on it before using it as the type and application conditions of the plaster to be applied on the surface after application of the primer shall affect the surface adherence.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • PRIMEL PLUS® shall be protected against quick drying under windy weather conditions.
  • You shall wait at least 1 days for the application be performed on the PRIMEL PLUS® depending on the ambient temperature.
  • Surface shall be watered in specific intervals within 1 days after the application to ensure its strength.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE