TR
References DEALER PORTAL
TR
  GYPSUM PLASTERS BUILDING PLASTERS SATENPER®

PRODUCTS

SATENPER®Saten Gypsum

Provides a Surface That Is Ready for Painting

APPLICATION FIELD

Applied as a final coat on surfaces applied with a fine coat of gypsum- or cement-based plasters on the interior surfaces.

REQUIREMENTS

  • Provides easy and convenient application thanks to its pastiness and long application time.
  • Provides perfect results before painting.

TECHNICAL VALUES

Compressive Strength, N/mm²

≥ 2,0

Bending Strength, N/mm²

≥ 1,0

Initial Setting Period, minutes

> 20

Reaction to Fire

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface will always be free of form oil, dust, paint and materials that reduce adherence.

PREPARATION of the MORTAR  

  • Water will be put to the mixing vessel first, then SATENPER® should be added (15.5-16,5 l water/30 kg bag) and it should be stirred until the lumps are removed. 
  • Stop for 5 minutes, and stir again to achieve a homogeneous mixture.
  • The mortar prepared should be applied to the surface at a thickness of 1-2 mm with a steel trowel.
  • Application is completed by checking the surface with a fine sandpaper before painting.
APPLICATION VIDEO For more information, please
watch our application video. WATCH

CONSUMPTION

Approx. 1.0 kg/m² for 1 mm of plaster thickness

PACKAGING

25 kg PP Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

6 Months Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 13279-1 / February 2009 / C6-20-2,0
Ministry of Public Works Pos. No: 04.458/E

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
  • We recommend the application to be performed between +5°C and +35°C.
  • You should wait at least 3 days for the application be performed on the SATENPER® depending on the ambient temperature.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet. Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE