TR
References DEALER PORTAL
TR
  THERMAL INSULATION SOLUTIONS THERMAL INSULATION PRODUCTS DOLKOT®

PRODUCTS

DOLKOT®Cement-Based High Performance Termal Insulation Board Adhesion Mortar With Polymer Additives

APPLICATION FIELD

Used for affixing polystyrene and STONEWOOL plates on surfaces such as rough and fine plaster, concrete, brick, etc

REQUIREMENTS

  • Ideal for affixing XPS, EPS and STONEWOOL.
  • Provides high adhesion performance.
  • It has polymer additives.

TECHNICAL VALUES

Hollow Bulk Density of Fresh Mortar, kg/m³

≥ 1000

Average Compressive Strength, N/mm²

> 6

Average Bending Strength, N/mm²

> 2
Adherence Strength (Adhesion Force to the Bottom Layer), N/mm²

≥ 0,5

Adherence Strength (Adhesion Force to the Termal Insulation Board ), N/mm²

≥ 0,08

Water Absorption, 30 minutes later, g

≤ 5

Water Absorption, 240 minutes later, g

≤ 10

Class of Reaction To Fire

A1

Grain Size Over 1 mm

Max 1.0%

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface of application shall always be free of materials such as form oil, dust, paint, etc.
  • Moving parts with low adherence shall be moved away from the surface.
  • You may advance to application after dampening the surface.

PREPARATION of the MORTAR  

  • A proper water amount shall be put inside the mixing vessel (6-6.75 l water/25 kg bag).
  • Powder material shall be added and stirred with hand mixer at low speed.
  • After resting for 5 minutes, the plaster shall be stirred until achieving a homogeneous mixture.
  • Mortar shall be applied to edges of the termal insulation board as a frame with a width of 4-5 cm and a thickness of 1 cm. A suitable amount of mortar shall be placed to the points in the central areas.
  • Plates are affixed to the floor with a suitable pressure.
  • On plastered surfaces, mortar is taken with a toothed trowel and affixed on the termal insulation board.
  • Mechanical plugling is performed when the mortar is cured adequately.

CONSUMPTION

4-5 kg/m² (average)

PACKAGING

25 kg polyethylene-reinforced kraft paper bags,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS 13566 / June 2013
Ministry of Public Works Pos. No: 04,480

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • It shall not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE