TR
References DEALER PORTAL
TR
  CEMENT BASED PLASTERS FACADE PRODUCTS SIVAMATiK PLUS

PRODUCTS

SIVAMATiK PLUSCement-Based Light Machine Plaster

APPLICATION FIELD

  • Applied on  brick, aerated concrete, concrete, fair faced concrete, pumice concrete, briquette walls on the interior and exterior faces of the buildings.
  • It can be used for architectural work due to the capability of the plaster to be processed.

REQUIREMENTS

  • Suitable for thick applications, too. (Maximum 10 cm) 
  • Capable to be processed, formed. 
  • Provides a strong surface with high adhesive resistance and strength.
  • It can be easily and rapidly applied with a machine. 
  • More resistant to water (hydrophobic) than a conventional plaster. 
  • Lighter than the normal rough and fine plasters.
  • Offers high resistance against crack formation.
  • Allows ease of application and working with low loss rate thanks to its special additives.

TECHNICAL VALUES

 Maximum Grain Size, mm

2

Dry Bulk Density, kg/m³

800 ± 200

Compressive Strength, N/mm²

1,5 – 5,0 (CS II)

Adhesive Strength, N/mm²

≥ 0,3 (FP:B)

Capillary Water Absorption, kg/m².min0.5

W0

Average Thermal Conductivity, W/m.K((λ10,dry)

≤ 0,27

Reaction to Fire

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface of application will always be free of form oil, dust, paint and materials that reduce adherence.
  • Repair of the cracks and holes should be made with the same material or using appropriate Entegre Repair Mortars before application.
  • Application surface should be dampened with water, if required.
  • Pre-coating should be performed using PRIMEL PLUS® on all surfaces 1 day before the application.
  • You can advance to application as soon as the surface is cured.

PREPARATION of the MORTAR  

  • SIVAMATİK PLUS will be mixed  (10-11 l water/25 kg bag) and sprayed to the surface with ready-mix plaster mixer and sprayer.
  • Application thickness should be between 1 cm and 10 cm in one coat.
  • Surface must be levelled.
  • The surface of the plaster should be polished when the plaster becomes hard enough and the surface shall be finished with a damp sponge. 
  • If the surface should be formed, you may start the operation 2 hours after the application.

CONSUMPTION

Approx. 10,0 kg/m2 for 1 cm of plaster thickness

PACKAGING

25 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

6 Months Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 998-1/ July 2011  Complies with A1-GP-CS II-W0 Class.

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) should be added to the prepared plaster.
  • We recommend the application to be performed between +5°C and +35°C.
  • SIVAMATİK PLUS will be protected against quick drying under windy weather conditions.
  • Fiberglass meshs or special meshs for the application field should be used on the joining areas of different materials and on the points that may be considered to be moving.
  • You shall wait at least 10 days for the application be performed on the SIVAMATİK PLUS depending on the ambient temperature.
  • Surface shall be watered in specific intervals within 3 days after the application to ensure its strength.
  • Do not go beyond the application surface and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE