TR
References DEALER PORTAL
TR
  CEMENT BASED PLASTERS DECORATIVE PLASTERS FiNEL® iÇ

PRODUCTS

FiNEL® iÇCement-Based Final Coat Plaster

APPLICATION FIELD

Used for obtaining a final coat surface on concrete surfaces and polished surfaces on the interior faces of the buildings.

REQUIREMENTS

  • Allows breathing of the surfaces.
  • Provides a smooth surface on the final coat.
  • It has a white colour.
  • It has polymer additives.

TECHNICAL VALUES

Dry Bulk Density of Hardened Mortar, kg/m³

1200 ± 200

Compressive Strength, N/mm²

0,4 - 2,5 (CS I)

Adhesive Strength, N/mm²

≥ 0,15 (FP:B)

Capillary Water Absorption, kg/m² min0.5

W0

Water Vapour Permeability Coefficient (µ)

≤ 25

Average Thermal Conductivity (W/m.K)

≤ 0,43

Reaction to Fire

A1

 

MSDS - Safety Data Sheet Ürünün Güvenlik Bilgi Formunu görüntülemek ve indirmek için tıklayınız. TDS - Technical Information Form Ürününün Teknik Bilgi Formunu görüntülemek ve indirmek için tıklayınız.

APPLICATION

SURFACE PREPARATION  

  • The surface of application willl always be free of materials such as form oil, dust, paint, etc.
  • Moving parts with low adherence should be moved away from the surface.
  • You can advance to application after dampening the surface.
  • Precautions against dusting should be taken on plastered surfaces.

PREPARATION of the MORTAR  

  • A proper amount of water will be put inside the mixing vessel (9-9,5 l water/25 kg bag).
  • Powder material will be added and stirred with hand mixer.
  • After resting for 5 minutes, the plaster should be stirred until achieving a homogeneous mixture.
  • The mortar prepared should be applied with a steel trowel.
  • Application thickness should be 2-3 mm.
  • It should be applied as two coats for thicker applications and the second coat should be applied when the first coat is set adequately.

CONSUMPTION

1.2 kg/m² for 1 mm of thickness

PACKAGING

25 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 998-1 / February 2017 / A1-GP-CSI

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) should be added to the prepared mortar.
  • Plaster should not be used again by mixing with water or dry plaster if its application time has expired.
  • FINEL® IÇ will be applied at least 7 days later than the application of the plaster.
  • We recommend the application to be performed between +5°C and +35°C.
  • FINEL® IÇ will be protected against quick drying under windy weather conditions.
  • It should not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the safety data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.

ONLINE CATALOGUE

You can reach our company catalog where you can find
our products and price information from here.
DETAILS

PRICE LIST

Our price list is being updated.

QUESTION REQUEST LINE

For questions, requests and suggestions, you may contact
us on weekdays between 07:00 - 16:00.

0545 368 34 73
0545 ENTEGRE